Yellow blossoms for you

Susan Robinson
August 5, 2019

spacer

Alexandra Renke has some beautiful flower designs in her die range and this is just one of them. They always cut out nicely too.

spacer

Nautical Compass

Susan Robinson
September 29, 2018

spacer

The sun is shining and the wind is blowing, nice day for a sail.

stamp: Windward 1073G by Stamp-it

embossing folder: Compass set siz658574 by Tim Holtz

To create this card, I first placed some sticky-backed silver foil card through the ‘Compass’ embossing folder. I then poured some alcohol inks (espresso, mushroom & stream) directly onto the foil card to colour. I used a paint brush and sponge to help move the ink around and ensure it got into all the crevices. You have to work fast though as the inks dry quickly.

When dry, I lightly sanded the card, erasing the colour from the raised areas and showing up the silver card beneath.

Next I stamped out the boat twice onto white card. One I coloured in the hull and sea, the other I used as spare sails to cut out and Magic Mount over original. I cut around the image on left side and tore paper beneath the water, leaving the right side of card with a straight edge.

I applied some Crackle Accent over ship’s hull and set aside to dry. Meanwhile I tore some cardboard from an old box to size and sponged around with sepia ink. Attach the white card with boat onto the torn cardboard.

Lastly I poked 3 holes at the top right of card and secured brass brads through. This turned out to be a lesson in patience as I had already stuck down the foil card, so had to lift it again in order to secure the dark brown thread beneath, which I then wound around each brad as shown. I just felt it needed something to fill that space and couldn’t find a suitable wording.

spacer

Theories 3 & 4

Susan Robinson
September 22, 2018

spacer

  

“Man with Balloon” is my 3rd card from Tim Holtz set ‘Theories’. I spritzed the card with Sunflower Sparkle Perfect Pearl Mists to try and lighten it but still didn’t feel that the man stood out enough, so stamped him again and embossed in black, then cut him out and Magic Mounted him over original. To further delineate him, I added the strips of washi tape and paper behind him to help emphasis his outline. This also helped to lighten the mood and make it a bit more playful. The balloon was cut from a circle which I coloured in then covered with Glossy Accent and attached a piece of string to. The wording I masked off from a Stamp-it stamp (shown at right). I was going to put the kids in too, but as they are all running away from him felt it gave the wrong vibe:) The right hand border is the edge of a filmstrip die.

  

“Hello There” is my 4th card from this series. I wasn’t quite sure what ambience to create with this ‘meeting of men’. I felt it had a slightly sinister vibe (hence the light bulb). Funnily enough it has turned out my favourite.

Rather than cut out the men individually, I stamped them onto a lighter coloured card and cut out a rectangle around them, allowing some of the background graffiti to show around edges. I matted them onto a very thin border of black card and Magic Mounted them into position. The light bulb I masked off from a Stamper’s Anonymous stamp which I cut out, Magic Mounted and Glossy Accented, attaching the string behind. The ‘Hello’ is a Penny Black die cut in gold foilboard. The black edging at right is a border punch. I chalked the ‘H’ on man’s shirt yellow to match.

 

 

spacer

Theories 1 & 2

Susan Robinson
September 20, 2018

spacer

From the Tim Holtz collection, here are 4 cards using his ‘Theories’ set (Stamper’s Anonymous CMS329).

I stamped the 4 images from set in black ink onto a 12×12 card which had been sprayed with various Distress Stains (Wild Honey, Vintage Photo, Peeled Paint..). I had already started playing with the bike one before I remembered to take a photo. As I began constructing my cards, I regretted my choice in background ink colours as they proved a little too dark for the men to stand out against them. To get around that, I stamped the men out again onto scrap card, cut them out and Magic Mounted them over originals.

For the bike card – I highlighted the bike frame with Gold Foil and the tyres with Black Accents. I applied Walnut Stain ink through Chevron stencil at top and die cut an arrow in black card and some cogs in copper card. I put gold brads through center of each tyre spoke. I gold embossed wording from set onto black card and added to top of card with folded strip of Japanese paper behind.

  

My second card from the set is the Man on the Tightrope. This was the quickest and easiest. I cut out 2 ‘Frameworks’ Sizzix die 659431, one in black, one in tan card and attached them along the base. I also cut out some birds in black, which I glued on overlapping the wording (from Stamp-it).

spacer

Jar of Flowers – Masked Background

Susan Robinson
February 18, 2018

spacer

stamps: Music Script & Thank You 4901B from Stamp-it

dies: Flower Jar siz662270 by Tim Holtz

inks: Dried Marigold & Tumbled Glass Distress Pads; Jet Black Archival Pad; Teal Blue StazOn Pad

INSTRUCTIONS:

This is the same technique as shown in previous post “Leaves of Gratitude”, except that instead of squishing the Distress ink pads onto a teflon mat, I squished them onto an acrylic block, for a more contained result. Then spritzed the block with water, before flipping it upside down onto white card. Lift off. You may wish at this stage to spritz your card with water also to help the inks run. You can control this somewhat by using a paintbrush to decide where you want the drips to go. Have a tissue ready to soak up any excess liquid.

      

Lastly I cut out the large jar from the sizzix die set in clear acetate, and sponged around the edge with the Teal StazOn pad. I glued some string across the neck and made a separate string bow.

I cut out one of the flowers from same set in white card and sponged with Peeled Paint & Spiced Marmalade Distress inks. I added some Pumpkin & Cantaloupe Liquid Pearls to flower heads (though not really happy with that decision). Set aside to dry.

The dragonflies are a Tonic punch. I cut them out in dark brown and again in vellum. I cut the tails off the vellum dragonflies and mounted them over the brown ones, gluing down the body only and lifting the wings. I then drew a line of Hot Cocoa Liquid Pearls down the body of each dragonfly, and set aside to dry.

I distressed the edges of the top card layer with the edge of my scissors before assembling the rest. I did this around the Thank you wording also.

spacer

Industry Baron

admin
September 9, 2016

spacer

male cards 017

 

 

 

 

 

 

 

 

 

stamps: Stamper’s Anonymous sets: Time Travelers CMS157, Warehouse District CMS124 & RemnantsCMS130, Destiny by Collections

inks: Jet Black, Potting Soil & Sepia Archival Pads; Evergreen Bough, Frayed Burlap, Walnut Stain, Black Soot & Rusty Hinge Distress Stains

papers: Pickle, Raven & Fawn Bazzill Cards; White & Ivory Matt Cards

accessories: Subway Embossing Folder siz657948; Brick Wall Sizzlit Strip siz658240; Brass  Bookplate; Brads; Bleach

adhesives: Super Tape; Magic Mount; Glossy Accents

tools: Big Shot Machine; Sponging Block; Waterbrush

INSTRUCTIONS:

Stamp numerous machinery images in sepia ink over ivory card. Sponge around the edges with sepia and potting soil inks using a sponging block. Colour down left side with Distress Stains – Evergreen Bough, Rusty Hinge & Walnut Stain, using a waterbrush to help blend inks. Attach to Pickle (green) backing card with two-sided tape. male cards 008

 

 

 

 

 

Open Subway embossing folder and lightly sponge bleach onto top half. Insert black card into folder, close, and put through Big Shot machine as normal. Open folder, take out black card and immediately wash bleach off folder. Leave black card aside to dry. The bleach will discolour card causing brown rusty looking patches around letters. When dry, cut card in half lengthways. Attach half to center of stamped ivory card (leaving other half for future project). male cards 010male cards 015

 

 

 

 

 

 

Cut out brick wall die in Big Shot machine in light brown card. Cut section to fit across bottom of card. Colour with Black Soot & Rusty Hinge Distress Stains. Glue across bottom of card.male layers 014

 

 

Stamp gentleman in black Archival ink onto white card and colour with layers of Distress Stains, starting with the palest colour first (see below). Ensure each layer is dry before adding another layer of colour, as you want the underneath layer to show through in areas and not blend in with the next colour. You don’t have to be too particular about staying in the lines, as you are going to cut him out. Cut him out (tearing across bottom section). Magic Mount him to card front. Fill eye glass in with Glossy Accents. Leave to dry. (note: this is not the original sample I used on the finished card).male layers 015

male layers 016male layers 018

 

 

 

 

 

 

Stamp wording in black ink onto scrap of white card. Sponge with sepia ink and insert into bookplate. Fix brads through either end and Magic Mount onto card front. male cards 017

 

 

 

 

 

 

 

See below for an alternative version of this card.

20160909_111106

spacer